Go to Filter

1.2mm (16g) Titanium Flat Back Ring with hole for attachments


Price: £2.99


Product Code: JBP-QMBCR

Select diameter:
Select Titanium colour:
Quantity


1.2mm (16g) Medical Grade Titanium 6Al-4VEli ASTM:F-136
Ball closure ring with flat back disc with a hole to accept attachments for internally threaded jewellery
Please select the required internal diameter for the ring (7mm, 8mm, 9mm or 10mm)
This is in 2 parts - the disc is compatible with QMDD attachments
The disc is 4mm and clips into the ring
Highly polished or anodised
See Titanium colour chart below for available colours

Disc is held in place by 2 dimples
Suitable for initial and healed piercings

Share 1.2mm (16g) Titanium Flat Back Ring with hole for attachments


Share
Share
This flat back ball closure ring is suitable for 1.2mm (16 gauge) body piercings and is made out of high quality medical grade Titanium in the colour of your choice.
The disc is 4mm and has a hole in order to attach 1.2mm internally threaded screw in attachments with a 0.9mm post (QMDD).
The disc has a dimple each side so that it can be clipped into the ring. You can select the ring with a 7mm, 8mm, 9mm or 10mm internal diameter.
It is available in any of the Titanium colour choices that we offer and looks amazing when worn in a piercing such as ear and smiley.

There have been no reviews

Measuring Your Piercing - Jewellery Measuring Guide

Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.

The measurements to consider with each piece of jewellery are as follows:

 

Piercing measuring guide - how to measure body piercing jewellery

Length / Diameter of the jewellery. (A / B in the diagram above)

The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.

An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.

Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)

These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.

Thickness Conversion
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
Length/Diameter Conversion
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"

Crystal and Materials Colour Charts

Swarovski jewel colour chart

Anodised Titanium colours used in JoBananas Body Piercing Jewellery

Bioplast colours used in JoBananas Bioplast Jewellery

Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.

Contact Details

Customer Reviews


The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.