Gold PVD Titanium Labret Stud - 1.6mm (14 Gauge)
This Titanium labret has a Gold PVD Coating to give it a shiny finish that is bound to attract attention, it is hypoallergenic and so ideal to wear in piercings. Labrets are a great choice for ear piercings because the disc is fixed and it can be inserted from the back of the piercing and pushed through, the 4mm ball screws on and off at the front of the piercing so this can be easier than trying to screw a ball on at the back. They can also be worn in labret, lip or Monroe piercings and the front can be changed for a different look.
Measuring Your Piercing - Jewellery Measuring Guide
Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.
The measurements to consider with each piece of jewellery are as follows:
Length / Diameter of the jewellery. (A / B in the diagram above)
The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.
An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.
Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)
These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"
Crystal and Materials Colour Charts
Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.