Large Gauge Jewellery

Large Gauge Jewellery

Large Gauge Body Piercing Jewellery

Large gauge ball closure rings and circular barbells are used in piercings that have been stretched or expanded over a period of time. Please note that due to their size these pieces of jewellery can be heavy depending on the material (Titanium is lighter that steel).

JoBananas sell a large range of heavy gauge jewellery including Circular barbells (CBB or Horseshoe), Ball Closure Rings (BCR) as well as curved and straight large gauge barbells. We also sell large gauge segment or seamless rings that look like a complete circle with a hard to see segment that is removed for fitting.

Heavy Gauge Jewellery Sizes

Sizes of our heavy gauge jewellery start at 2mm and we also sell 2.4mm, 3mm, 4mm, 5mm, 6mm and 8mm in most designs depending on what diameter or length your require for your stretched piercing. On our steel large gauge Prince Albert (PA) curved barbells we also offer a choice of ball sizes.

Large Gauge Jewellery Materials & Colours

We offer a wide range of materials for our large gauge jewellery, these include, plain steel, gold plated steel, Titanium (in a range of colours), Black PVD and acrylic. Our Titanium large gauge Barbells, BCR and Horseshoes we offer in a fantastic range of anodised colours. These are all coloured in house by ourselves and we offer  - Highly Polished, Bronze, Brown, Blue, Ice Blue, Yellow, Gold, Rose Gold, Peach, Pink, Purple, Two Tone, Teal, Green, Rainbow and Oil Slick.

Internal and External Thread

Wherever possible we like to offer internally threaded options for large gauge jewellery. Internal threaded jewellery has the thread on the ball or cone and this screws into holes on the main body of the jewellery. External threaded jewellery has the thread on the main body of the piece and this screws into a hole on the ball or cone. Advantages of an internal thread is the main body fits into a recess in the ball or cone and gives a neater finish with less areas where dirt and bacteria can collect. A further advantage of internal thread jewellery is that it does not tend to snag on the piercing when being inserted.

It is important to remember that not all internally threaded balls and cones will fit any piece of internal jewellery so please check the description of the item you are buying or get in contact with us.

Easy Fitting Ball Closure Rings

In the past as you went to a larger gauge in a BCR it became harder to put the ball back in once the jewellery was fitted into the piercing. Normally this would require special large gauge pliers or a trip to a professional piercer adding to the cost and time. Finally a couple of solutions are now available:

BCR with Screw on Ball

These heavy gauge rings have an internally threaded post on the actual ball and are screwed into a hole on one side of the ring so when in place they look like a regular heavy gauge ring. These are hard to tell from a tradiitional BCR with a dimpled ball and are held very securely.

BCR Ring with Screw on Ball for Easy Fitting

BCR with Easy Fit Ball

The easy fit ball closure ring works by the ball having spring loaded domes that fit into dimples on either side of the ring horns. These are not as secure as a standard BCR crimp ball or screw on ball but still a good alternative for certain piercings.

BCR with Spring Loaded Ball for Easy Fitting

Page of 2
Surgical Steel Large Gauge BCR CBR with Screw on Ball

Surgical Steel Large Gauge BCR CBR with Screw on Ball

316L Surgical steel ball closure ring with Screw on Ball
Heavy large gauge piercing BCR ring
Suitable for healed piercings only

Available in sizes below:

4mm x 16mm or 19mm
5mm x 16mm or 19mm
6mm x 19mm
8mm x 19mm or 22mm
10mm x 19mm
12mm x 19mm

£9.00

Titanium Large Gauge Straight Barbell - Internally threaded

Titanium Large Gauge Straight Barbell - Internally threaded

Medical Grade Titanium 6Al-4VEli ASTM:F-136

Internally threaded large gauge barbell

Highly polished or anodised (coloured) finish

Both ends are removable

Initial and healed piercings

Available in the following gauges:

3.2mm (8g) - 6mm balls

4mm (6g) - 8mm balls

5mm (4g) - 8mm balls

6mm (2g) - 8mm balls

7mm (0g) - 10mm balls

8mm - 12mm balls

9mm - 12mm balls

10mm (00g) - 12mm balls

Lengths (internal) - 12mm, 14mm, 16mm, 19mm, 22mm

£11.00

Titanium Curved Barbell - PA Bar 2.4mm 10g

Titanium Curved Barbell - PA Bar 2.4mm 10g

2.4mm (10g) Grade 23 Titanium (6AL-4V ELi) male genital piercing barbell
Externally threaded
Highly polished or anodised finish
Length - 8mm - 30mm
Both ends are removable
Suitable for initial and healed piercings

£7.00

Large Gauge Acrylic Ball Closure Ring

Large Gauge Acrylic Ball Closure Ring

Acrylic Ball Closure Ring
Ball is removable to allow fitment to piercing
Light and comfortable

Available in black, white, clear, green or purple acrylic sizes below:

1.6mm x 11mm
2mm x 12mm
2.5mm x 14mm
3.2mm x 14.5mm
4mm x 14.5mm
5mm x 16mm
6mm x 16mm
8mm x 16mm

£4.00

Large Gauge Titanium Segment Ring

Large Gauge Titanium Segment Ring

Grade 23 Titanium (6AL-4V ELi) Segment Ring

Heavy large gauge segment rings

Highly polished or anodised (coloured) finish

Suitable for initial and healed piercings

Available in sizes below:

2mm ==>10, 12, 14, 16, 19mm

2.4mm ==>10, 12, 14, 16, 19mm

3.2mm ==>12, 16, 19mm

4mm ==>14, 16, 19, 22mm

5mm ==>12, 14, 16, 19, 22mm

6mm ==>16, 19mm

Please note that the larger the gauge (and the smaller the diameter) the harder Segment Rings are to open and they will require specialised large gauge pliers and ideally need to be fitted by a piercer.

£18.00

 
Large Gauge Curved Titanium Piercing Barbell - PA Bar

Large Gauge Curved Titanium Piercing Barbell - PA Bar

Grade 23 Titanium (6AL-4V ELi) Large Gauge Curved Barbell.
Internally Threaded
Highly polished or anodised (coloured) finish
Both ends are removable
Suitable for initial and healed piercings

Available in sizes below:

3.2mm ==>12, 14, 16, 19, 22, 25mm
4mm ==>14, 16, 18, 19, 20, 22, 25, 26, 30mm
5mm ==>14, 16, 18, 19, 20, 22, 25, 26, 30mm
6mm ==>16, 19, 22, 24, 25, 26, 30, 32mm
7mm ==>16, 19, 22, 25mm
8mm ==>16, 19, 22, 25mm

£18.00

Large Gauge Titanium Circular Barbell CBB

Large Gauge Titanium Circular Barbell CBB

Grade 23 Titanium (6AL-4V ELi) Circular Barbell

Internally threaded

Heavy large gauge Horseshoe Rings

Highly polished or anodised (coloured) finish

Suitable for initial and healed piercings

Available in sizes below:

2.4mm ==>10, 12, 14, 16, 19, 22, 25mm

3.2mm ==>10, 12, 14, 16, 19, 22, 25mm

4mm ==>12, 14, 16, 19, 22, 25mm

5mm ==>12, 14, 16, 19, 22, 25mm

6mm ==>14, 16, 19, 22, 25mm

7mm ==>16, 19, 22, 25mm

8mm ==>16, 19, 22, 25mm

£21.50

 
Surgical Steel Large Gauge BCR CBR with Easy Fit Ball

Surgical Steel Large Gauge BCR CBR with Easy Fit Ball

316L Surgical steel ball closure ring with Easy Fit Ball
Heavy large gauge piercing BCR ring
The ball has spring loaded dimples so can easily be pushed into place without the need for pliers apart from the 7mm and 9mm which have a different fastening
Suitable for healed piercings only

Available in sizes below:

4mm ==>14, 16, 19, 22, 25mm
5mm ==>14, 16, 19, 22, 25mm
6mm ==>16, 19, 22, 25mm
7mm ==>16, 19mm
8mm ==>14, 16, 19, 22, 25mm
9mm ==>14, 16, 19mm
10mm ==>19, 22mm

£9.00

Easy Fit Titanium Large Gauge Ball Closure BCR

Easy Fit Titanium Large Gauge Ball Closure BCR

Grade 23 Titanium (6AL-4V ELi) ball closure ring with easy fit ball

Titanium Ball that is easier to pop in and out - no pliers required!

Please note - these are not spring loaded balls like on the steel range. They are held in place by pressure and do move about. They are not as secure as a standard BCR or a Screw fit BCR.

Heavy large gauge piercing BCR rings

Highly polished or anodised finish

Suitable for initial and healed piercings

Available in sizes below:

3mm ==>10, 12, 14, 16, 22mm

4mm ==>10, 12, 14, 16, 18, 19, 22mm

5mm ==>12, 14, 16, 19, 22mm

6mm ==>14, 16, 18, 19, 22, 24, 26mm

7mm ==>12, 14, 16mm

8mm ==>14, 16, 19, 22mm

9mm ==> 14, 16, 19, 22mm

10mm ==> 19, 22mm

1 only supplied in the colour and size that you select, photograph for illustration purposes only.

£11.00

Titanium Large Gauge Straight Barbell - 2.4mm (10G)

Titanium Large Gauge Straight Barbell - 2.4mm (10G)

2.4mm (10G) Grade 23 Titanium (6AL-4V ELi) straight piercing barbell
Highly polished or anodised finish
Both ends are removable
Initial and healed piercings

£5.00

Surgical Steel Large Gauge Barbell

Surgical Steel Large Gauge Barbell

316L Surgical steel barbell

Heavy large gauge piercing bars

Both ends are removable

Externally threaded

Suitable for healed piercings only

Available in sizes below:

2mm ==>8, 10, 12, 14, 16, 18, 20, 22mm

2.4mm ==>8, 10, 12, 14, 16, 18, 20, 22mm

3.2mm ==>8, 10, 12, 14, 16, 18, 20, 22mm

4mm ==>8, 10, 12, 14, 16, 18, 20, 22mm

5mm ==>8, 10, 12, 14, 16, 18, 20, 22mm

6mm ==>8, 10, 12, 14, 16, 18, 20, 22mm

8mm ==>8, 10, 12, 14, 16, 18, 20, 22mm

£2.00

Large Gauge Titanium Ball Closure BCR with Screw Ball

Large Gauge Titanium Ball Closure BCR with Screw Ball

Medical Grade Titanium 6Al-4VEli ASTM:F-136

Ball closure ring (BCR) with easily removable screw ball

Titanium Ball that screws on and off easily - no pliers required and no ball rattle!

Heavy large gauge piercing BCR ring

Highly polished or anodised finish

Suitable for initial and healed piercings

Available in sizes below:

4mm ==>10, 12, 14, 16, 19, 22mm (8mm ball)

5mm ==>14, 16, (8mm ball) 19, 20, 22mm (10mm ball)

6mm ==>12, 14, 16, 19, 22mm (10mm ball)

7mm ==>14, 16, 19, 22mm (10mm ball)

8mm ==>12, 14, 16, 19, 22mm (12mm ball)

9mm ==> 14, 16, 19, 22mm (12mm ball)

1 only supplied in the colour and size that you select, photograph for illustration purposes only.

£12.00

Internally Threaded Surgical Steel Large Gauge Circular Barbell CBB Horseshoe

Internally Threaded Surgical Steel Large Gauge Circular Barbell CBB Horseshoe

316L Surgical steel circular barbells
Heavy large gauge horseshoe rings
Internally Threaded
Both ends are removable
Suitable for healed piercings only

Available in sizes below:

2mm ==>10, 12, 14, 16, 19, 22, 25mm
2.4mm ==>10, 12, 14, 16, 19, 22, 25mm
3.2mm ==>10, 12, 14, 16, 19, 22, 25mm
4mm ==>12, 14, 16, 19, 22, 25mm
5mm ==>12, 14, 16, 19, 22, 25mm
6mm ==>14, 16, 19, 22, 25mm
8mm ==>16, 19, 22mm

More Sizes available soon!

£3.00

Internally Threaded Large Gauge Straight Barbell - Steel

Internally Threaded Large Gauge Straight Barbell - Steel

316L Surgical Steel barbell
Internally Threaded Barbell (the thread is on the balls)
Both ends are removable
Suitable for healed piercings only
Ball sizes vary so please contact us if you need to check what size balls come with a specific size barbell.
Spare Balls available here

Available in sizes below:
2mm ==>8, 10, 12, 14, 16, 18, 20, 22mm
2.4mm ==>8, 10, 12, 14, 16, 18, 20, 22mm
3.2mm ==>8, 10, 12, 14, 16, 18, 20, 22mm
4mm ==>8, 10, 12, 14, 16, 18, 20, 22mm
5mm ==>8, 10, 12, 14, 16, 18, 20, 22mm
6mm ==>8, 10, 12, 14, 16, 18, 20, 22mm
8mm ==>8, 10, 12, 14, 16, 18, 20, 22mm

£5.00

Surgical Steel Large Gauge BCR

Surgical Steel Large Gauge BCR

316L Surgical steel ball closure ring

Heavy large gauge piercing BCR rings

Suitable for healed piercings only

Available in sizes below:

2mm ==>10, 12, 14, 16, 19, 22, 25, 28mm

2.4mm ==>10, 12, 14, 16, 19, 22mm

3.2mm ==>10, 12, 14, 16, 19, 22, 25, 28mm

4mm ==>12, 14, 16, 19, 22, 25, 28mm

5mm ==>12, 14, 16, 19, 22, 25, 28mm

6mm ==>14, 16, 19, 22, 25, 28mm

8mm ==>16, 19, 22, 25, 28mm

10mm ==>19, 22mm (Spring loaded ball)

Please note that the larger the gauge the harder BCR's are to open and they will require large gauge BCR pliers and ideally need to be fitted by a piercer.

£2.00

Titanium Large Gauge Ball Closure BCR

Titanium Large Gauge Ball Closure BCR

Grade 23 Titanium (6AL-4V ELi) ball closure ring

Titanium Ball

Heavy large gauge piercing BCR rings

Highly polished or anodised finish

Suitable for initial and healed piercings

Available in sizes below:

2mm ==>10, 12, 14, 16, 19, 22mm

2.4mm ==>10, 12, 14, 16, 19, 22, 24mm

3.2mm ==>10, 12, 14, 16, 19, 22, 24, 26mm

4mm ==>10, 12, 14, 16, 19, 22, 24, 26, 28mm

5mm ==>12, 14, 16, 19, 22, 24, 26mm

6mm ==>14, 16, 19, 22, 24, 26mm

7mm ==>16, 19, 22mm

8mm ==>16, 19, 22mm

Please note that the larger the gauge (and the smaller the diameter) the harder BCR's are to open and they will require large gauge BCR pliers and ideally need to be fitted by a piercer.

£4.00

Curved Prince Albert Piercing Barbell - Internally Threaded PA Bar

Curved Prince Albert Piercing Barbell - Internally Threaded PA Bar

316L Surgical Steel male genital PA piercing barbell
Curved Internally Threaded PA Bar

Available in the following gauges:

2mm (12g) -1.2mm thread
2.4mm (10g) -1.2mm thread
3mm (8g) -2mm thread
4mm (6g) -2mm thread
5mm (4g) -2mm thread
6mm (2g) -2mm thread
8mm (0g) -2mm thread

Lengths 14mm, 16mm, 19mm, 22mm 25mm
Ball Sizes do vary so please contact us if you need to check prior to ordering
Spare Balls available here
Both ends are removable
Suitable for healed piercings
1 only supplied - 2 shown for illustration only

£4.00

Spare Ball for Steel PA Barbells

Spare Ball for Steel PA Barbells

316L Surgical Steel Balls for our Internally threaded Steel PA Bars

These balls will fit our Steel PA Bars and our Steel Internally Threaded Straight Barbells:

5mm ball to fit 2mm barbell
6mm ball to fit 2mm, 3mm or 4mm barbell
8mm ball to fit 3mm or 4mm barbell
10mm ball to fit 2mm, 2.4mm, 3mm, 4mm or 5mm barbell
11mm ball to fit 6mm barbell
12mm ball to fit 2.4mm, 3mm, 4mm, 5mm, 6mm or 8mm barbell
14mm ball to fit 4mm, 5mm, 6mm or 8mm barbell

The price is for 1 ball
These balls are made to fit specific size bars and we cannot make any guarantee that they will fit any other bars.

£4.00

Page of 2
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy.
More Information