Go to Filter

Internal Titanium Circular Barbell with Cones- 1.2mm (16 gauge)


Price: $USD11.51


Product Code: JB-newQMTB27-QMDD6

Select diameter:
Select Titanium colour:
Select cone size:
Quantity


1.2mm (16G) Grade 23 Titanium (6AL-4V ELi) circular barbell with Cones
Internally threaded to fit attachments with a 0.9mm thread (product codes starting JB-QM)
Internal diameter - 6, 8, 10, 12mm
Cone sizes - 3 or 4mm
Initial and healed piercings
One barbell only supplied in the length and colour of your choice
Please note that the shaft and cones will all be in the colour that you select

Share Internal Titanium Circular Barbell with Cones- 1.2mm (16 gauge)


Share
Share
Internally Threaded Titanium 1.2mm (16 gauge) circular barbell (cbb) with removable cones both ends. These bars will fit attachments with a 0.9mm thread (these are product codes starting JB-QM)
You can choose the cone size - either 3mm or 4mm
These horseshoes are made out of high quality grade 23 Titanium (6AL-4V ELi) and they are available in 6mm, 8mm, 10mm or 12mm lengths.
You can choose from Highly Polished (silver coloured) Titanium or Bronze, Brown, Blue, Ice Blue, Yellow, Gold, Rose Gold, Peach, Pink, Purple, 2 Tone, Rainbow, Teal or Green.
1 only supplied - picture is for illustration only.
Please note that the shaft and cones will all be in the colour that you select - if you would like the cones and shaft to be different colours we can do that, please just pop a note at checkout.

There have been no reviews

Measuring Your Piercing - Jewellery Measuring Guide

Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.

The measurements to consider with each piece of jewellery are as follows:

 

Piercing measuring guide - how to measure body piercing jewellery

Length / Diameter of the jewellery. (A / B in the diagram above)

The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.

An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.

Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)

These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.

Thickness Conversion
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
Length/Diameter Conversion
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"

Crystal and Materials Colour Charts

Swarovski jewel colour chart

Anodised Titanium colours used in JoBananas Body Piercing Jewellery

Bioplast colours used in JoBananas Bioplast Jewellery

Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.

Contact Details

Customer Reviews