Go to Filter

Internal Titanium Labret Stud Small Base - 1.2mm (16G)

Price: £3.99

Product Code: JBP-AIMTB16-stem

Select Titanium colour:
Select size:

1.2mm (16G) Medical Grade Titanium 6Al-4VEli ASTM:F-136 labret stud
Internally threaded to fit attachments with a 0.9mm thread (product codes starting JBP-QM)
Length - 4, 5, 6, 7, 8mm
Tiny Base 4mm, 5mm, 7mm with 2.5mm Base
Small Base: 6mm, 7mm, 8mm with 3mm Base
Initial and healed piercings
One labret shaft only supplied in the length and colour of your choice

Share Internal Titanium Labret Stud Small Base - 1.2mm (16G)

Internally threaded Titanium micro labret in 1.2mm (16 gauge) which will fit attachments with a 0.9mm thread (these are product codes starting JBP-QM)
These labrets are made in the UK out of Medical Grade Titanium 6Al-4VEli ASTM:F-136 and they are available in 4mm, 5mm, 6mm, 7mm or 8mm lengths.
The smaller fixed disc at the back of the labret make these studs ideal for multiple ear piercings as the discs will not get in the way of each other.
4mm - 2.5mm base
5mm - 2.5mm base
6mm - 3mm base
7mm - 2.5mm or 3mm base
8mm - 3mm base
You can choose from Highly Polished (silver coloured) Titanium or Bronze, Brown, Blue, Ice Blue, Yellow, Gold, Rose Gold, Peach, Pink, Purple, 2 Tone, Rainbow, Teal or Green.

Measuring Your Piercing - Jewellery Measuring Guide

Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.

The measurements to consider with each piece of jewellery are as follows:


Piercing measuring guide - how to measure body piercing jewellery

Length / Diameter of the jewellery. (A / B in the diagram above)

The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.

An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.

Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)

These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.

Thickness Conversion
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
Length/Diameter Conversion
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"

Crystal and Materials Colour Charts

Swarovski jewel colour chart

Anodised Titanium colours used in JoBananas Body Piercing Jewellery

Bioplast colours used in JoBananas Bioplast Jewellery

Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.

Contact Details

Customer Reviews

The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.