Jewelled Ear Stretching Spiral
|Gem Set Steel Ear Spiral Taper |
Material: 316L Surgical Steel
Jewels are covered with an expoxy resin seal so they are smooth and will not fall out.
Available in clear, red, light rose and crystal AB
Price is for 1, please buy 2 if you need a pair
These metal spirals are really unusual because they are set with gems that sparkle and shine, the gems are available in either clear, red, light rose or crystal AB and are resin coated so the stones will not fall out and the surface is nice and smooth so that it will slide into the stretched lobe. They are made out of 316L Surgical Steel and are available in the following gauges:
Measuring Your Piercing - Jewellery Measuring Guide
Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.
The measurements to consider with each piece of jewellery are as follows:
Length / Diameter of the jewellery. (A / B in the diagram above)
The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.
An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.
Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)
These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"
Crystal and Materials Colour Charts
Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.