Jewelled Gold PVD Titanium Labret Stud - 1.2mm (16 Gauge)
|This Jewelled Titanium labret has had a Gold PVD Coating applied to give it a shiny polished finish, it is hypoallergenic and so ideal to wear in piercings. Labrets are a great choice for ear piercings because the disc is fixed meaning that the labret stud can be inserted from the back of the piercing and pushed through, they can also be worn in labret, lip or Monroe piercings. The 3mm ball screws on and off at the front of the piercing so this can be easier than trying to screw a ball on at the back and this can also be changed for any 1.2mm screw on attachment.
The ball is set with a Swarowski Crystal with the following choices - Clear, Crystal AB, Amethyst (Purple), Aqua, Blue Zircon (Turquoise), Fuchsia (Deep Pink), Jet Black, Light Amethyst (Lilac), Light Rose Pink, Light Siam Red, Peridot (Light Green), Rose Pink or Sapphire Blue.
The labret is 1.2mm (16 Gauge) and it is available in 6mm, 7mm, 8mm, 9mm, 10mm or 12mm lengths, it is important to choose the correct size body jewellery so please do check our measuring guide if you are unsure.
Measuring Your Piercing - Jewellery Measuring Guide
Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.
The measurements to consider with each piece of jewellery are as follows:
Length / Diameter of the jewellery. (A / B in the diagram above)
The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.
An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.
Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)
These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"
Crystal and Materials Colour Charts
Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.