Go to Filter

Titanium Couture Internally Threaded Labret with Tear Crescent


Price: £13.99


Product Code: JBP-iLabSB5

Select shaft length:
Select titanium colour:
Select ear:
Quantity


Medical Grade Titanium 6Al-4VEli ASTM:F-136 Internally Threaded Labret
Tear Crescent Top with 4 clear gems
1.2mm x 6/7/8/10mm
Gem Size: 6x5x4x3mm (0.8mm Thread)
Back Disc measures 3mm and is fixed
Gauge: 1.2mm (16 Gauge) with 0.8mm thread
Length - 6, 7, 8, 10mm
Available in a choice of Titanium Colours
Internal Threaded Labret
Thread is 0.8mm for 1.2mm jewellery
Suitable for initial and healed piercings
1 only supplied

Share Titanium Couture Internally Threaded Labret with Tear Crescent


Share
This Couture Titanium labret stud looks amazing with an stunning tear crescent at the front, it is internally threaded (which means that the front attachment has a thread which is screwed into the hole in the labret).
The stud is 1.2mm (16 gauge) in thickness and the thread on the front disc is 0.8mm. The labret is available in a choice of 6, 7, 8 or 10mm lengths.
The back disc measures 3mm and is not removable, it is fixed to the labret. The gems measure 6mm, 5mm, 4mm and 3mm
Internally threaded jewellery is very popular because it is easy to insert into piercings and less likely to cause any irritation when fitted because the whole bar is smooth.
The labrets are available in a choice of Titanium colours - Highly Polished, Bronze, Brown, Ice Blue, Blue, Yellow, Gold, Rose Gold, Peach, Pink, Purple, 2 Tone Purple Blue, Teal, Green or Rainbow

There have been no reviews

Measuring Your Piercing - Jewellery Measuring Guide

Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.

The measurements to consider with each piece of jewellery are as follows:

 

Piercing measuring guide - how to measure body piercing jewellery

Length / Diameter of the jewellery. (A / B in the diagram above)

The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.

An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.

Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)

These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.

Thickness Conversion
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
Length/Diameter Conversion
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"

Crystal and Materials Colour Charts

Swarovski jewel colour chart

Anodised Titanium colours used in JoBananas Body Piercing Jewellery

Bioplast colours used in JoBananas Bioplast Jewellery

Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.

Contact Details

Customer Reviews


The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.