Share| Internally threaded Titanium barbell in 1.2mm (16 gauge) with 2 cone ends. The cones are available in 3mm or 4mm and the thread on them is 0.9mm.
The bars and ends are made out of high quality grade 23 Titanium (6AL-4V ELi) and they are available in 6, 7, 8, 10, 12 or 14mm lengths. Being internally threaded the bars are very gentle to insert into piercings as there is no thread on the barbell itself so it is completely smooth, the thread is on the cones at each end, both of which are removable. You can choose from Highly Polished (silver coloured) Titanium or Bronze, Brown, Blue, Ice Blue, Yellow, Gold, Rose Gold, Peach, Pink, Purple, 2 Tone, Teal, Rainbow or Green. The entire item will be the colour of your choice if you would like the separate parts in different colours we can also do that, please just contact us or pop a note at checkout when you place your order. |
Measuring Your Piercing - Jewellery Measuring Guide
Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.
The measurements to consider with each piece of jewellery are as follows:
Length / Diameter of the jewellery. (A / B in the diagram above)
The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.
An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.
Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)
These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.
|
Thickness Conversion * 1mm = 18 gauge * 1.2mm = 16 gauge * 1.6mm = 14 gauge * 2mm = 12 gauge * 2.4mm = 10 gauge * 3.2mm = 8 gauge * 4mm = 6 gauge * 5mm = 4 gauge * 6mm = 2 gauge * 8mm = 0 gauge |
Length/Diameter Conversion * 6mm = 1/4" * 8mm = 5/16" * 10mm = 3/8" * 11mm = 7/16" * 12mm = 1/2" * 14mm = 9/16" * 16mm = 5/8" * 18mm = 11/16" * 19mm = 3/4" * 21mm 13/16" |
Crystal and Materials Colour Charts
