Go to Filter

Titanium Internal Barbell with Double Hearts - 1.2mm (16G)


Price: £6.99


Product Code: JB-QMTB12-Q9

Select shaft length:
Select heart size:
Select Titanium colour:
Quantity


1.2mm (16G) Grade 23 Titanium (6AL-4V ELi)
Internal straight barbell with flat heart discs each end
Length - 6, 7, 8, 10, 12 or 14mm
Heart Size: 3 or 4mm
Polished or anodised (coloured) finish
Suitable for initial and healed piercings
Price is for 1 barbell in the length and colour of your choice
Barbell and ends will be the same colour (we can do different colours of each part if required)

Share Titanium Internal Barbell with Double Hearts - 1.2mm (16G)


Share
Share
Internally threaded Titanium barbell in 1.2mm (16 gauge) with 2 flat disc heart ends. The hearts are available in 3mm or 4mm and the thread on them is 0.9mm.
The bars and ends are made out of high quality grade 23 Titanium (6AL-4V ELi) and they are available in 6, 7, 8, 10, 12 or 14mm lengths.
Being internally threaded the bars are very gentle to insert into piercings as there is no thread on the barbell itself so it is completely smooth, the thread is on the hearts at each end, both of which are removable.
You can choose from Highly Polished (silver coloured) Titanium or Bronze, Brown, Blue, Ice Blue, Yellow, Gold, Rose Gold, Peach, Pink, Purple, 2 Tone, Teal, Rainbow or Green.
The entire item will be the colour of your choice if you would like the separate parts in different colours we can also do that, please just contact us or pop a note at checkout when you place your order.

There have been no reviews

Measuring Your Piercing - Jewellery Measuring Guide

Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.

The measurements to consider with each piece of jewellery are as follows:

 

Piercing measuring guide - how to measure body piercing jewellery

Length / Diameter of the jewellery. (A / B in the diagram above)

The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.

An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.

Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)

These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.

Thickness Conversion
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
Length/Diameter Conversion
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"

Crystal and Materials Colour Charts

Swarovski jewel colour chart

Anodised Titanium colours used in JoBananas Body Piercing Jewellery

Bioplast colours used in JoBananas Bioplast Jewellery

Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.

Contact Details

Customer Reviews


The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.