Go to Filter

Titanium Internal Barbell with Domed Disc - 1.6mm (14G)

Price: $USD6.89

Product Code: JB-QTB11-Q1

Select shaft length:
Select disc size:
Select Titanium colour:

1.6mm (14G) Grade 23 Titanium (6AL-4V ELi)
Internal straight barbell with ball and domed disc
Length - 6mm to 40mm
Disc Size: 3, 4 or 5mm
Polished or anodised (coloured) finish
Suitable for initial and healed piercings
Price is for 1 barbell in the length of your choice

Share Titanium Internal Barbell with Domed Disc - 1.6mm (14G)

Internally threaded Titanium barbell in 1.6mm (14 gauge) with ball and domed disc. The disc end is available in 3mm, 4mm or 5mm and the thread on the ends is 1.2mm.
The barbells are made out of high quality grade 23 Titanium (6AL-4V ELi) and they are available in 6mm through to 40mm lengths.
Being internally threaded they are very gentle to insert into piercings because there is no thread on the barbell itself so it is completely smooth, the thread is on the each end and they are both removable.
You can choose from Highly Polished (silver coloured) Titanium or Bronze, Brown, Blue, Ice Blue, Yellow, Gold, Rose Gold, Peach, Pink, Purple, 2 Tone, Teal, Rainbow or Green.
The whole bar and ends will be the colour of your choice.

There have been no reviews

Measuring Your Piercing - Jewellery Measuring Guide

Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.

The measurements to consider with each piece of jewellery are as follows:


Piercing measuring guide - how to measure body piercing jewellery

Length / Diameter of the jewellery. (A / B in the diagram above)

The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.

An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.

Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)

These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.

Thickness Conversion
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
Length/Diameter Conversion
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"

Crystal and Materials Colour Charts

Swarovski jewel colour chart

Anodised Titanium colours used in JoBananas Body Piercing Jewellery

Bioplast colours used in JoBananas Bioplast Jewellery

Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.

Contact Details

Customer Reviews