Go to Filter

Titanium Straight Barbell With Disks - 1.2mm (16G)


Price: $USD3.37


Product Code: TI-1.2-SBB-DI

Select shaft length:
Select Titanium colour:
Select disc size:
Quantity


1.2mm (16G) Grade 23 Titanium (6AL-4V ELi)
Polished or anodised finish
Length - 6, 7, 8, 9, 10, 12, 14, 16, 18, 20mm
Disk size - 3mm diameter & 2mm thick or 4mm diameter & 2.5mm thick
Externally Threaded
Both ends are removable
Suitable for initial and healed piercings

Share Titanium Straight Barbell With Disks - 1.2mm (16G)


Share
Share
These flat disk micro barbells are available in 6mm through to 20mm so they can be worn in many different body piercings, the grade 23 Titanium is 1.2mm (16 gauge) in thickness and the barbell is externally threaded. The disks are 2mm (3mm discs) or 2.5mm (4mm discs) in thickness and both ends are removable
The bars are available in a choice of Titanium colours, highly polished (silver), bronze, brown, blue, ice blue, yellow, gold, rose gold, peach, pink, purple, 2 tone blurple, teal 2 tone purple green, rainbow or green.

There have been no reviews

Measuring Your Piercing - Jewellery Measuring Guide

Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.

The measurements to consider with each piece of jewellery are as follows:

 

Piercing measuring guide - how to measure body piercing jewellery

Length / Diameter of the jewellery. (A / B in the diagram above)

The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.

An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.

Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)

These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.

Thickness Conversion
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
Length/Diameter Conversion
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"

Crystal and Materials Colour Charts

Swarovski jewel colour chart

Anodised Titanium colours used in JoBananas Body Piercing Jewellery

Bioplast colours used in JoBananas Bioplast Jewellery

Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.

Contact Details

Customer Reviews


The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.