New Body Jewellery
We are always adding new body jewellery to the JoBananas store. Here you will find our latest body piercing products for all possible places on the body you may have pierced.
We have new designs of Belly bars, tongue rings, tragus studs, ear stretching jewellery, nose rings and studs available on Surgical Steel, Titanium, Bioplast and BioFlex.
-
-
-
-
Large Gauge Curved Titanium Piercing Barbell - PA Bar 6mm x 19mm
|
Grade 23 Titanium (6AL-4V ELi) Large Gauge Curved Barbell.
6mm (2 gauge) thickness with an internal length of 19mm
Internally Threaded
Highly polished or anodised (coloured) finish
10mm balls
Both ends are removable
Suitable for initial and healed piercings
|
$USD10.60
$USD21.22
save 50%
-
Gold PVD Titanium Spiral Twister 12mm
This Gold PVD Titanium Twister, sometimes called a spiral, is an unusual piece of Body Jewellery which can be worn in many different piercings, it looks great in pierced ear lobes and also in navel piercings, it is a great way to disguise wonky navel piercings that don't quite line up! If the piercing is slightly off centre a standard belly bar can look a bit odd if it is at a strange angle but these body spirals hide that, they look great and no one would notice that the piercing is crooked.
Because of the Hypoallergenic Gold PVD coating which has been applied to the Titanium the twister is a great choice to wear as it is biocompatible and less likely to cause any irritation. The thickness is 1.6mm (14 gauge) and diameter 12mm (1/2") and 6mm balls.
|
$USD4.24
$USD8.49
save 50%
-
1.6mm (14 gauge) Opal Ball
|
These opal balls are truly stunning in all colour options and the 1.6mm (14 gauge) balls are available in white, pink or blue, and they look amazing on labrets, barbells and spirals when worn in piercings. The pink is paler than shown in the photo but is so pretty, they all look stunning.
They have steel inserts that will accept 1.6mm (14 gauge) externally threaded body piercing jewellery and the balls are 4mm, 5mm or 6mm in diameter. The balls are made out of synthetic opals.
We also have these balls for 1.2mm (16 gauge) jewellery in a separate product
|
-
Bioflex Push Fit Labret - Coloured Gem
|
This is a clear internal Bioflex Labret with a push fit attachment set with a gem in the colour and size of your choice. The end simply pulls out by gently twisting whilst pulling and then it pushes back in place. The gems available are either 2.35mm, 3mm or 4mm.
The gems are available in crystal ab, pink or aqua.
Bioflex is a soft material that is fantastic for use in piercings and if worn in mouth piercings it wont irritate the gums as much as metal alternatives.
Available in 3 different thicknesses and several different lengths this labret can be worn in many piercings such as labret piercings, monroe and ear piercings.
We also have these studs in clear available in a separate product.
|
-
Lips and Fangs Nipple Shield
|
This is a really unusual nipple shield and is definately not for the faint hearted! It features red lips with fangs dripping with blood.
The barbell is 1.6mm (14 gauge) and the length of the bar is is 42mm in order to accommodate the shield which threads through. The shield can be removed completely from the bar if required and then it slides back on (obviously it would have to be removed from the piercing in order to remove it).
The internal measurement of the shield is 12mm (1/2") and the shield curves forward from the bar to make it comfortable to wear. The inside of th mouth part is 11mm top to bottom internally at the widest part.
This nipple jewellery has a really edgy look with a vampire theme that is great for a Halloween Party or any day really when you want to achieve a thrill with your jewellery!
|
-
Internally Threaded Double Disc Barbell - 1.6mm (14 Gauge)
|
These barbells are made out of Medical Grade Titanium and internally threaded (which means that both discs have a 1.2mm thread to screw into the hole in the bar). Internally threaded jewellery is easy to insert into piercings and because the whole bar is smooth they are less likely to cause any irritation when fitted.
The circular discs are available in 2, 3, 4, 5 or 6mm and both ends are removable.
The barbell is 1.6mm (14 gauge) in thickness and available in 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 30mm, 34mm, 36mm, 38mm or 40mm lengths.
Available in a choice of Titanium colours, the barbell and both discs will be the same colour.
|
-
1.2mm (16g) Titanium Internally Threaded Labret - Flat Heart
|
This Titanium labret stud looks amazing with a cute flat heart, it is internally threaded (which means that the heart has a thread which is screwed into the hole in the labret).
The stud is 1.2mm (16 gauge) in thickness and the thread on the heart is 0.9mm. The labret is available in a choice of 6, 7, 8, 9, 10, 12 or 14mm lengths.
Internally threaded jewellery is very popular because it is easy to insert into piercings and less likely to cause any irritation when fitted because the whole bar is smooth.
The labrets are available in a choice of Titanium colours - Highly Polished, Bronze, Brown, Ice Blue, Blue, Yellow, Peach, Pink, Purple, 2 Tone Purple Blue, Teal, Green or Rainbow
|
-
1.6mm (14g) Titanium Internally Threaded Labret - Flat Disc
|
This Titanium labret stud looks amazing with a stunning flat disc at the front, it is internally threaded (which means that the front disc has a thread which is screwed into the hole in the labret).
The stud is 1.6mm (14 gauge) in thickness and the thread on the front disc is 1.2mm. The labret is available in a choice of 6, 7, 8, 9, 10, 12, 14 or 16mm lengths.
The removable disc is available in 2mm, 3mm, 4mm, 5mm or 6mm - that back disc is not removable and is fixed to the labret and only available in 1 standard size.
Internally threaded jewellery is very popular because it is easy to insert into piercings and less likely to cause any irritation when fitted because the whole bar is smooth.
The labrets are available in a choice of Titanium colours - Highly Polished, Bronze, Brown, Ice Blue, Blue, Yellow, Peach, Pink, Purple, 2 Tone Purple Blue, Teal, Green or Rainbow
|
-
1.6mm (14g) Titanium Internally Threaded Labret - Flat Heart
|
This Titanium labret stud looks amazing with a cute flat heart, it is internally threaded (which means that the heart has a thread which is screwed into the hole in the labret).
The stud is 1.6mm (14 gauge) in thickness and the thread on the heart is 1.2mm. The labret is available in a choice of 6, 7, 8, 9, 10, 12, 14 or 16mm lengths.
Internally threaded jewellery is very popular because it is easy to insert into piercings and less likely to cause any irritation when fitted because the whole bar is smooth.
The labrets are available in a choice of Titanium colours - Highly Polished, Bronze, Brown, Ice Blue, Blue, Yellow, Peach, Pink, Purple, 2 Tone Purple Blue, Teal, Green or Rainbow
|
-
1.6mm (14g) Titanium Internally Threaded Labret - Flat Star
|
This Titanium labret stud looks amazing with a stunning flat star, it is internally threaded (which means that the star has a thread which is screwed into the hole in the labret).
The stud is 1.6mm (14 gauge) in thickness and the thread on the star is 1.2mm. The labret is available in a choice of 6, 7, 8, 9, 10, 12, 14 or 16mm lengths.
Internally threaded jewellery is very popular because it is easy to insert into piercings and less likely to cause any irritation when fitted because the whole bar is smooth.
The labrets are available in a choice of Titanium colours - Highly Polished, Bronze, Brown, Ice Blue, Blue, Yellow, Peach, Pink, Purple, 2 Tone Purple Blue, Teal, Green or Rainbow
|
-
Internally Threaded Double Star Barbell - 1.6mm (14 Gauge)
|
These barbells are made out of Medical Grade Titanium and internally threaded (which means that the ball and star disc have a 1.2mm thread to screw into the hole in the bar). Internally threaded jewellery is easy to insert into piercings and because the whole bar is smooth they are less likely to cause any irritation when fitted.
The Star discs are available in 3, 4 or 5mm and both ends are removable.
The barbell is 1.6mm (14 gauge) in thickness and available in 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 30mm, 34mm, 36mm, 38mm or 40mm lengths.
Available in a choice of Titanium colours, the barbell and both star discs will be the same colour.
|
-
1.2mm (16 Gauge) Micro Titanium Long Barbell
|
We are always being asked for thinner long barbells for industrial ear piercings so here you go...
This Grade 23 Titanium Barbell is 1.2mm (16 gauge) in thickness so thinner than the standard scaffold piercing bars. It is available in a choice of colours and lengths - 34mm, 36mm, 38mm or 40mm and comes with 3mm balls as standard but you can pay extra for slightly larger 4mm balls.
So the search is over!
|
-
1.6mm (14 gauge) Shimmer Ball
|
These metallic balls look really unusual and shimmery - they are available in Silver or Gold colourways and in either 4mm or 5mm.
They will fit 1.6mm (14 gauge) externally threaded body jewellery such as barbells, labrets and spirals.
The balls are made out of Steel (Zircon Steel for the gold one), they are highly polished and then the effect is created by sandblasting them.
Please note that due to the technique used they do have a rough finish so you do need to bear that in mind.
We also have these balls available in 1.6mm (14 gauge) and you can select them in our build your own body jewellery designer to add to the jewellery of your choice.
|
-
1.2mm (16 gauge) Shimmer Ball
|
These metallic balls look really unusual and shimmery - they are available in Silver or Gold colourways and in either 3mm or 4mm.
They will fit 1.2mm (16 gauge) externally threaded body jewellery such as barbells, labrets and spirals.
The balls are made out of Steel (Zircon Steel for the gold one), they are highly polished and then the effect is created by sandblasting them.
Please note that due to the technique used they do have a rough finish so you do need to bear that in mind.
We also have these balls available in 1.6mm (14 gauge) and you can select them in our build your own body jewellery designer to add to the jewellery of your choice.
|
-
1.2mm (16 gauge) Opal Ball
|
These opal balls are truly stunning in all 4 of the colour options, white, pink, green or blue, and they look amazing on labrets, barbells and spirals when worn in piercings.
They have steel inserts that will accept 1.2mm (16 gauge) externally threaded body piercing jewellery and the balls are 3mm or 4mm in diameter. The balls are made out of synthetic opals.
|
-
L Shaped Nose Retainer
|
These L shaped nose hiders are a great way of keeping your nostril piercing open but hiding it (or at least making it less visible!). They are made out of clear acrylic and are 0.8mm or 20 gauge in thickness with a small 2.2mm clear disk.
The length if the shaft from the bottom of the disc to the bend measures 6mm.
Nose retainers are a fantastic way of disguising your piercings for interviews, work, school or for hospital procedures where no metal is allowed such as MRI scans or X Rays.
We also have lots of other Retainers available for different piercings in our Piercing Retainers section.
|
-
-
-
Large Gauge Curved Titanium Piercing Barbell - PA Bar 4mm x 25mm
|
Grade 23 Titanium (6AL-4V ELi) Large Gauge Curved Barbell.
4mm (6 gauge) thickness with an internal length of 25mm (1")
Internally Threaded
Highly polished or anodised (coloured) finish
8mm balls
Both ends are removable
Suitable for initial and healed piercings
|
$USD9.54
$USD18.03
save 47%
-
Micro Ball Closure ring with Bullet
|
This is an unusual bullet closure attached to a captive bead ring made out of 316L Surgical Steel. The bullet measures 4mm thick and has a dimple each side which clip into the ring. It is available with either an 18 gauge (1mm) or 16 gauge (1.2mm) steel bcr in a choice of internal diameter sizes so it can be worn in different body piercings.
We also have larger versions of this in 1.6mm (14 gauge)
|
-
Screw On Ball with Opal Stone - 1.6mm (14 gauge)
|
This ball is really unusual with a synthetic opal stone set in 316L Surgical steel. It is suitable for externally threaded 1.6mm (14 gauge) body jewellery such as barbells, labrets and eyebrow bars. The ball is available in a choice of 4mm, 5mm or 6mm.
Available with a blue or white opal
|
-
Screw On Ball with Opal Stone - 1.2mm (16 gauge)
|
This ball is really unusual with a synthetic opal stone set in 316L Surgical steel. It is suitable for externally threaded 1.2mm (16 gauge) body jewellery such as barbells, labrets and eyebrow bars. The ball measures 3mm which is the same size as a standard 1.2mm barbell or labret ball.
Available with a blue or white opal
|
-
Titanium Internally Threaded Flat Disc - 1.6mm (14 gauge)
|
These titanium flat discs are to fit internally threaded body jewellery such as labrets or barbells, they are made out of Grade 23 Titanium and the thread on them is 1.2mm thick. Internally threaded jewellery is very popular with piercing fans because it is easy to fit and less likely to cause any irritation when worn because the whole shaft of the jewellery is smooth.
The discs are available in 2mm, 3mm, 4mm or 5mm with a choice of titanium colours - Highly Polished, Bronze, Brown, Ice Blue, Blue, Yellow, Peach, Pink, Purple, 2 Tone Purple Blue, Teal or Green
|
-
Titanium Internally Threaded Star - 1.6mm (14 gauge)
|
These titanium stars are to fit internally threaded body jewellery such as labrets or barbells, they are made out of Grade 23 Titanium and the thread on them is 1.2mm thick. Internally threaded jewellery is perfect for body piercings because it is easy to put in and less likely to cause any irritation when fitted because the whole shaft of the jewellery is smooth.
The stars are available in 3mm, 4mm or 5mm with a choice of titanium colours - Highly Polished, Bronze, Brown, Ice Blue, Blue, Yellow, Peach, Pink, Purple, 2 Tone Purple Blue, Teal or Green
|
-
1.6mm (14 gauge) attachment - Red Polka Dot Bow
|
A cute polka dot bow screw on attachment for 14 gauge (or 1.6mm) externally threaded body jewellery such as labrets and barbells. It looks amazing in lots of different piercings such as ear or lip piercings.
This is also available in 1.2mm (16 gauge)
|
-
1.2mm (16 gauge) attachment - Red Polka Dot Bow
|
A cute polka dot bow screw on attachment for 16 gauge (or 1.2mm) externally threaded body jewellery such as labrets and barbells. It looks amazing in lots of different piercings such as ear or lip piercings.
This is also available in 1.6mm (14 gauge)
|
-
Ear Piercing Bar - Clear Multigem Design
|
This is a stunning multi jewelled barbell set with 5 clear crystals in alternating sizes, 2mm and 1.5mm. It is made out of 316L Surgical Steel and the gems are set in cast steel. The front part is fixed to the bar and the ball at the back is removable.
It is 1.2mm (16 gauge) in thickness and available with a choice of internal barbell lengths - 6mm, 7mm or 8mm so is ideal for ear piercings such as tragus, helix or even standard lobe piercings.
This pretty bar can also be gold or rose gold plated.
|
