Go to Filter

Titanium Internally Threaded Flat Disc - 1.6mm (14 gauge)

Price: $USD2.87

Product Code: JBP-QDD10

Select disc size:
Select titanium colour:

Grade 23 Titanium (6AL-4V ELi) Flat Disc for Internally Threaded Body Jewellery
Gauge: 1.6mm (14 Gauge) - Thread on disc is 1.2mm
Disc size - 2, 3, 4 or 5mm
Available in a choice of Titanium colours
Suitable for initial and healed piercings
1 only supplied (photograph is for illustration purposes only)

Share Titanium Internally Threaded Flat Disc - 1.6mm (14 gauge)

These titanium flat discs are to fit internally threaded body jewellery such as labrets or barbells, they are made out of Grade 23 Titanium and the thread on them is 1.2mm thick. Internally threaded jewellery is very popular with piercing fans because it is easy to fit and less likely to cause any irritation when worn because the whole shaft of the jewellery is smooth.
The discs are available in 2mm, 3mm, 4mm or 5mm with a choice of titanium colours - Highly Polished, Bronze, Brown, Ice Blue, Blue, Yellow, Peach, Pink, Purple, 2 Tone Purple Blue, Gold, Rose Gold, Teal or Green

There have been no reviews

Measuring Your Piercing - Jewellery Measuring Guide

Wearing the correct size of body jewellery is very important. If you wear a size that is too small it could easily irritate or hurt your piercing. If your jewellery is too big it can easily catch your clothes resulting in a damaged piercing.

The measurements to consider with each piece of jewellery are as follows:


Piercing measuring guide - how to measure body piercing jewellery

Length / Diameter of the jewellery. (A / B in the diagram above)

The above example pictures show you the measurements that you need to take for a Banana Bar, a Ball Closure Ring (BCR), a Barbell and a Labret. Only measure a piece of jewellery that currently fits you correctly.

An alternative method is to directly measure your piercing between both holes using a ruler, although this can sometimes be difficult on your own.

Thickness / Gauge of the jewellery (C in the diagram)
The most common sizes are as follows:
* Navel, Tongue and Nipple jewellery - 1.6mm (or 14 Gauge)
* Eyebrow - 1.2mm (16 Gauge)
* Nose - 1.0mm (18 Gauge)
* Labret piercings are usualy either 1.2mm (16 Gauge) or 1.6mm (14 Gauge)

These are the the standard thicknesses of body jewellery that we sell, so unless you have an unusual piercing, you do not have to worry about this measurement.
We often get asked what are the sizes of jewellery in my country. In Europe thickness is shown in mm but in other parts of the world people use gauge. The following table should help you convert the sizes.

Thickness Conversion
* 1mm = 18 gauge
* 1.2mm = 16 gauge
* 1.6mm = 14 gauge
* 2mm = 12 gauge
* 2.4mm = 10 gauge
* 3.2mm = 8 gauge
* 4mm = 6 gauge
* 5mm = 4 gauge
* 6mm = 2 gauge
* 8mm = 0 gauge
Length/Diameter Conversion
* 6mm = 1/4"
* 8mm = 5/16"
* 10mm = 3/8"
* 11mm = 7/16"
* 12mm = 1/2"
* 14mm = 9/16"
* 16mm = 5/8"
* 18mm = 11/16"
* 19mm = 3/4"
* 21mm 13/16"

Crystal and Materials Colour Charts

Swarovski jewel colour chart

Anodised Titanium colours used in JoBananas Body Piercing Jewellery

Bioplast colours used in JoBananas Bioplast Jewellery

Please note that these colours are shown to give an indication of the colour of the jewellery but slight colour variations do occur occasionally. Not all designs are available in all colours.

Contact Details

Customer Reviews