0
£0.00
1.2mm (16g) BCR
16g - 1.2mm Steel and Titanium Ball Closure Rings
BCR Ball closure rings are one of the most versatile pieces of body jewellery. Available in a wide degree of gauges and diameters there will always be one to fit any piercing. The ball is held in place by two dimples on either side of that ball. These are then held in place by tension of the ring ends. In most cases the ball can easily be removed by hand but on larger gauges you may require special ball closure ring pliers.
BCR Ball closure rings are one of the most versatile pieces of body jewellery. Available in a wide degree of gauges and diameters there will always be one to fit any piercing. The ball is held in place by two dimples on either side of that ball. These are then held in place by tension of the ring ends. In most cases the ball can easily be removed by hand but on larger gauges you may require special ball closure ring pliers.
1.2mm (16g) Titanium Flat Back Ring with hole for attachments
|
1.2mm (16g) Medical Grade Titanium 6Al-4VEli ASTM:F-136 Ball closure ring with flat back disc with a hole to accept attachments for internally threaded jewellery Please select the required internal diameter for the ring (7mm, 8mm, 9mm or 10mm) This is in 2 parts - the disc is compatible with QMDD attachments The disc is 4mm and clips into the ring Highly polished or anodised See Titanium colour chart below for available colours Disc is held in place by 2 dimples Suitable for initial and healed piercings |
£4.00
1.2mm (16g) Titanium Flat Back Ring - Flower Gem
|
1.2mm (16g) Medical Grade Titanium 6Al-4VEli ASTM:F-136 Ball closure ring with flat back disc with a hole to accept attachments for internally threaded jewellery and a jewelled flower. 6 petal flower with swarowski crystals. Please note that the Aqua and Amethyst options have opal centre stones and the other colours have contrasting gems. Please select the required internal diameter for the ring (7mm, 8mm, 9mm or 10mm) This is in 3 parts - the flower is removable and the disc is compatible with QMDD attachments The disc is 4mm and clips into the ring Highly polished or anodised See Titanium colour chart below for available colours Disc is held in place by 2 dimples Suitable for initial and healed piercings |
£12.00
Micro Ball Closure ring with Bullet
|
316L Surgical Steel BCR with Clip in Bullet Includes ball closure ring Available Sizes: 1mm (18 gauge) - 7mm, 9mm, 11mm 1.2mm (16 gauge) - 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm Bullet thickness: 4mm Bullet clips in place and has a dimple each side |
£5.00
Sperm Ball Closure Ring or BCR 1.2mm (16 gauge)
|
1.2mm (16g) 316L Surgical Steel
Cast steel charm 8mm, 9mm or 10mm internal diameter Suitable for healed piercings only |
£5.00
1.2mm Steel Flat Back Ball Jewelled Heart
|
1.2mm (16g) Surgical Steel heart with flat back jewelled disc Available with 10mm diameter heart Disc size 4mm Plain or Gold Plated finish Disc is held in place by 2 dimples Suitable for healed piercings only |
£7.00
Black Steel Flat Back Ball Closure Ring with hinge - smiley
|
1.2mm (16g) Black PVD Steel BCR with flat back jewelled disc Perfect for Smiley Piercings Hinged for easy opening and closing Ball Closure Ring has an 8mm internal diameter Disc size 4mm |
£11.00
1.2mm (16g) Titanium Flat Back Ring - Opal Flower
|
1.2mm (16g) Medical Grade Titanium 6Al-4VEli ASTM:F-136 Ball closure ring with flat back disc with a hole to accept attachments for internally threaded jewellery and a synthetic opal flower. Please select the required internal diameter for the ring (7mm, 8mm, 9mm or 10mm) This is in 3 parts - the flower is removable and the disc is compatible with QMDD attachments The disc is 4mm and clips into the ring Highly polished or anodised See Titanium colour chart below for available colours Disc is held in place by 2 dimples Suitable for initial and healed piercings |
£18.00
1.2mm (16g) Titanium Flat Back Ring - Large Trinity Gem
|
1.2mm (16g) Medical Grade Titanium 6Al-4VEli ASTM:F-136 Ball closure ring with flat back disc with a hole to accept attachments for internally threaded jewellery and a jewelled trinity gem. The trinity gem measures 6mm across, each gem is 3mm Please select the required internal diameter for the ring (7mm, 8mm, 9mm or 10mm) This is in 3 parts - the trinity gem is removable and the disc is compatible with QMDD attachments The disc is 4mm and clips into the ring Highly polished or anodised See Titanium colour chart below for available colours Disc is held in place by 2 dimples Suitable for initial and healed piercings |
£13.00
1.2mm (16g) Titanium Flat Back Ring - 5 Petal Flower
|
1.2mm (16g) Medical Grade Titanium 6Al-4VEli ASTM:F-136 Ball closure ring with flat back disc with a hole to accept attachments for internally threaded jewellery and a 5 petal gem flower. Swarowski crystals. Please select the required internal diameter for the ring (7mm, 8mm, 9mm or 10mm) This is in 3 parts - the flower is removable and the disc is compatible with QMDD attachments The disc is 4mm and clips into the ring Highly polished or anodised See Titanium colour chart below for available colours Disc is held in place by 2 dimples Suitable for initial and healed piercings |
£13.00
Titanium Gem Asia BCR Dual - 1.2mm (16 gauge)
|
1.2mm (16g) Titanium BCR with Clip in Dual Asia Gem Attachment is 10.5mm tall and 4.5mm wide 8mm (5/16") or 10mm (3/8") internal diameter BCR Suitable for rim, rook, daith or conch piercings with suitable sized ring Suitable for initial and healed piercings |
£8.00
Titanium Gem Asia BCR Quad - 1.2mm (16 gauge)
|
1.2mm (16g) Titanium BCR with Clip in Quad Asia Gem Attachment is 10mm tall and 7mm wide 8mm (5/16") or 10mm (3/8") internal diameter BCR Suitable for rim, rook, daith or conch piercings with suitable sized ring Suitable for initial and healed piercings |
£10.00
Titanium Gem Asia BCR Single - 1.2mm (16 gauge)
|
1.2mm (16g) Titanium BCR with Clip in Single Asia Gem Attachment is 10mm tall and 7mm wide 8mm (5/16") or 10mm (3/8") internal diameter BCR Suitable for rim, rook, daith or conch piercings with suitable sized ring Suitable for initial and healed piercings |
£8.00
1.2mm (16g) Titanium Flat Back Ring - Trinity Opal
|
1.2mm (16g) Medical Grade Titanium 6Al-4VEli ASTM:F-136 Ball closure ring with flat back disc with a hole to accept attachments for internally threaded jewellery and a jewelled trinity opal. The trinity opal measures 5mm across, each gem is 2mm Please select the required internal diameter for the ring (7mm, 8mm, 9mm or 10mm) This is in 3 parts - the trinity opal is removable and the disc is compatible with QMDD attachments The disc is 4mm and clips into the ring Highly polished or anodised See Titanium colour chart below for available colours Disc is held in place by 2 dimples Suitable for initial and healed piercings |
